Scansonic HD MB B Series + Marantz Cinema 40

Scansonic HD MB B Series 5.1 Amp + Speaker System

The Scansonic MB Series, now in its second generation, is based on technologies that originated in the world-renowned Raidho Acoustics speakers, most notably, the signature ribbon tweeter. The MB-B Series presents a wide range of speakers where the goal is to offer a very high-quality level, all wrapped in classical and authentic Scandinavian design.

The MB-B Series was designed to see how far it is possible to go on a budget, designing a series of products that is accessible for most people but also with no compromise in sound quality. With a solid foundation in the Nordic design tradition, these elegant Danish speakers are visually square when seen directly from the front, and curved and organic when seen from an angle. The rounded edges of the cabinet reduce diffraction and minimize the sonic imprint on the frequency response. It does not matter if your home features modern or classic decor, or anything in-between, the timeless design of the MB-B Series will fit in any space.

Powering this surround speaker system is the Marantz Cinema 40 - a Premium 125W 9.4ch 8K AV Receiver with 3D Audio, and HEOS Built-In. Built upon decades of rich heritage, designed with timeless style, and engineered for utmost performance, Marantz CINEMA Series is the foundation of the world's most demanding home theatres.

What's Included:

• Marantz Cinema 40 9.4 Channel AV Receiver
• Scansonic MB2.5 B Floorstanding Speakers Pair
• Scansonic MB Center B Centre Speaker
• Scansonic MB1 B Bookshelf Speakers Pair
• Scansonic MB10 100W Subwoofer
• Scansonic MB-Series Speaker Stands Pair

Marantz Cinema 40 - Premium 125W 9.4ch 8K AV Receiver with 3D Audio, HEOS Built-In

Built upon decades of rich heritage, designed with timeless style, and engineered for utmost performance, Marantz CINEMA Series is the foundation of the world's most demanding home theatres. The new CINEMA 40 is a premium 9.2 channel 125-watts-per-channel amplification, Dolby Atmos, DTS:X Auro 3D, and 8K Ultra HD plus HEOS® Built-in streaming. CINEMA 40 is a statement piece and reference level A/V Receiver.

Key Features:

• Performance, power and connectivity to suit your listening and entertaining preferences
• 9-channel discrete power amplifier delivers 125W per channel (8-ohm, 20Hz – 20kHz, 0.08% THD, 2ch. drive)
• 4 Dedicated Subwoofer Outs
• Marantz proprietary Hyper Dynamic Amplifier Modules (HDAM) amplification circuitry
• Dolby Atmos, DTS: X, IMAX Enhanced, and more multi-dimensional surround formats supported
• 8K HDMI inputs and outputs for 8K quality video from the latest Ultra-HD source devices and displays
• 6 HDMI inputs with 8K upscaling and Enhanced Audio Return Channel (eARC) HDMI support
• 3 HDMI outputs for a second monitor plus Zone 2 (4K)
• 8K/60Hz, 4K/120Hz pass-through or upscaling along with HDR10+ and Dynamic HDR
• Supports Dolby Vision, eARC and ALLM for enhanced picture and audio
• High-Res audio streaming with FLAC, ALAC, and WAV support up to 24-bit/192-kHz, as well as DSD 2.8/5.6MHz
• HEOS Built-in for multi-room streaming, music streaming and voice control
• Built-in Wi-Fi with 2.4GHz/5GHz dual-band support (dual antenna)
• Supports all major voice control agents and streaming services
• Integrated phono input to directly connect your turntable

Scansonic MB2.5 B

The MB2.5 B is a slim floorstander speaker pair, each with two 4.5” carbon-coned drivers and a sealed ribbon tweeter. The MB2.5 B is a 2.5-way speaker with the second woofer assisting in the power demanding bass region. The 2.5’s cabinets are heavy, braced and curved, with carbon reinforcements to deliver a powerful room-filling sound.

Key Features:

- 2.5-way floorstanding speaker pair
- Low mass ribbon tweeters
- Dual 4.5″ carbon cone drivers
- Rounded cabinet design reduces diffraction and colouration
- Reflex port at base of speaker
- Adjustable feet made with high-quality aluminium
- Visually and tonally matches the rest of the MB Series speakers

"The Scansonic HD MB-2.5 is a beautiful loudspeaker that elevates itself above the average for its price, in both industrial design and sound signature. In order to let it perform at it’s best, it is essential that extra attention is given to placement and that the amplifier has enough quality to make it shine. When these basic requirements are met, nothing stands in the way of enjoying this piece of Danish delight."
Read the full review on The Ear

Scansonic MB Center B

The MB Center B is a high-performance centre speaker designed to match a complete MB B speaker setup in a home cinema system. Consistent with the rest of the MB-B series, the sleek and elegant enclosure is heavily braced and curved. It features two 4.5” carbon-coned woofers and a sealed ribbon tweeter. The ribbon-tweeter, in combination with the woofers, allows for an open and detailed sound, making the Center B ideal to handle the delicate midrange-area with open and clear dialogue, while still matching the dynamics from the front channel speakers

Key Features:

- Low mass ribbon tweeter
- Dual 4.5″ carbon cone drivers
- Rounded cabinet design reduces diffraction and colouration
- Same dynamic driver section as the MB2.5
- Large dynamic scale and limitless headroom
- Reflex ports at front of speaker for easy placement
- Adjustable aluminium feet
- Visually and tonally matches the rest of the MB Series speakers

Scansonic MB1 B

The MB1 B is a small and very elegant 2-way speaker, designed to blend in anywhere. The elegant enclosure is curved and heavily braced with solid carbon reinforcements. The speakers are designed around a sealed ribbon-tweeter and a 4.5” carbon-coned woofer. The sound is open, crisp and very dynamic, and MB1 B is able to produce a soundstage that performs beyond its compact size. The reflex port is located at the front which makes the MB1 B a good choice in rooms with little or no space, placed in a bookshelf or on the matching stands.

Key Features:

- 2-way bookshelf speaker pair
- Low mass ribbon tweeters
- 4.5″ carbon cone drivers
- Rounded cabinet design reduces diffraction and colouration
- Reflex port at front of speaker for ease of placement
- Visually and tonally matches the rest of the MB Series speakers

Matching Scansonic MB Twin Pillar Speaker Stands included

Designed for the MB1 B, the included stands will both elevate and support the bookshelf speakers. These twin-pillar stands feature clean lines as well as the same aluminium feet seen on the MB2.5 B floorstanding speakers. When used in a surround configuration with other MB-series speakers, you can be sure that your speaker system will look consistent all the way around the room.

The twin pillar design grants the stands a less-imposing presence in the room, drawing your attention to what's important, the speakers on top. Every aspect of these stands is designed to enhance the look, feel, and performance of your Scansonic bookshelf speakers.

Scansonic MB10

Using their knowledge and expertise in designing high-end loudspeakers, Scansonic focused on making the MB10 reproduce bass in a more natural and “honest” way than normally seen in subwoofers. The class A/B amplifier, in place of the commonly used Class D, plays a key role in the MB10’s natural and dynamic performance. This, combined with a low mass 10” woofer, and an enclosure tuned to match the woofer, means the sub doesn’t use any frequency equalization circuits. The result is a subwoofer that sounds articulate and refined without any booming - blending effortlessly into this high-quality speaker system while at the same time possessing the ability to rattle the room when playing a movie or your favourite piece of music. The MB10 can be connected with the LFE-input, or with speaker-inputs for the receivers/amplifiers where there is no active subwoofer-output available.

Key Features:

- 10" downward-firing low-mass driver
- 100W Class A/B amplifier
- Adjustable 25 Hz – 150 Hz frequency response
- Rear-ported
- LFE and speaker inputs
- Visually and tonally matches the MB-B Series speakers
- Technology inherited from world-renowned Raidho Acoustics speakers

Scandinavian design and build quality

The MB-B Series has a solid foundation in the Nordic design tradition. This range is simple, sleek, elegant and visually square when seen directly from the front, and curved and organic when seen from an angle.

The rounded edges of the cabinets reduce diffraction and minimize the sonic imprint on the frequency response. It does not matter if your home features a modern or classic decor, or anything in-between, the timeless design of these speakers will fit in any space.

The internal construction has been changed, in order to optimize airflow which combined with the minimalistic use of damping material has created a very dynamic and linear low-frequency reproduction

The old acoustically vented cabinets have now been replaced with a ported cabinet, which is tuned for optimal impulse response - resulting in a more linear, dynamic and detailed low-end reproduction, while at the same time making in-room placement of the speaker much easier and versatile.

Ribbon Tweeters

It was clear to Scansonic from the very beginning, that some core techniques from the Raidho speakers would be of great importance: The speakers had to be designed around a ribbon tweeter that works with at super lightweight diaphragm that is sealed around the edges to allow for a seamless transition to the midrange region.

The MB-B ribbon tweeter has a membrane with an extremely low mass. It is formed by a Kapton-aluminum sandwich that is only 20 um thick, and the resulting mass is app. 0.03g, which is approximately 50 times less than any conventional textile, ceramic, beryllium or diamond dome. The lower mass translates directly into higher resolution and less material colouration.

Redesigned Crossover

The crossovers have been completely redesigned. This has resulted in a much more linear and natural sound, which is clearly visible throughout the whole MB-B range. The crossover has been designed to time-align all drive units at listening distance. The result is a speaker which not only presents a large and precise soundstage, it also boasts a timing that will make your foot tap and put a big smile on your face!

Weaved Carbon Cones

For the MB-B Series, Scansonic developed a ridged, dustcap free, carbon membrane. By carefully optimizing the shape and stiffness, Scansonic has succeeded in making a very quiet woofer that blends beautifully with the ribbon tweeter. The woofer has an overhung magnet system, with long linear stroke and excellent bass performance.

The drivers are carefully designed to match the slim enclosure. The carbon-cone benefits from a very low weight, which in combination with the powerful magnet system, offers a very dynamic sound.

A nice side effect of these design choices is that the break-in period has been reduced greatly to around 100 hours, meaning you can hear the best sound your speakers can offer sooner.

Sounds great with any amp

The Scansonic MB-B speakers are, by design, easy loads on practically any amplifier. The impedance doesn't drop below 4 ohms on any model, and the sensitivity is high on all models.

We will recommend a high-quality amplifier at any time, but it doesn't matter if it is a tube amplifier, solid-state, a Class D, or a Class A. The MB-B speakers are designed to sound great with anything, you connect them to.

About the MB Series

The MB Series, now in its second generation, is based on technologies that originated in the world-renowned Raidho Acoustics speakers, most notably, the signature ribbon tweeter. The MB-B Series presents a wide range of affordable speakers where the goal is to offer a very high-quality level, all wrapped in classical and authentic Scandinavian design.

The MB-B series was designed to see how far it is possible to go on a budget, designing a series of products that is accessible for most people but also with no compromise in sound quality.

The design was essential, and the visual appearance of an MB-B speaker will fit any room with the clean lines and a simple choice of modern colours: satin white or black.

About Scansonic HD

It would be impossible to introduce Scansonic without first mentioning Raidho. Having worked with Raidho speakers for more than 12 years, this Danish group of engineers and designers found themselves facing a completely new challenge when they were tasked with creating a new range of high-performance speakers for the Scansonic brand.

From the start, Scansonic's team were dedicated to building on all the experiences and strengths obtained from designing the Raidho speakers. At the same time, they also had to be aware of the long heritage and the Nordic design tradition of the Scansonic brand. The ultimate goal was to create the very best possible speakers within reasonable financial limits.

[Optional] Complete This Package with Premium Cable Options

Tributaries Speaker Cable With Banana Plugs

Terminate your front speakers with these high-quality pre-terminated speaker cables from Tributaries.

The Series 4 Star-Quad Speaker cable begins with ultra-pure highly conductive oxygen-free copper (HC-OFC) developed specifically for audio applications. Two 12AWG speaker conductors are the result of combining 16AWG and 14AWG conductors opposite each other in a 4 conductor Star-Quad speaker arrangement.

Key Features:

- Assembled by hand in Orlando Florida, USA
- Star-Quad design reduces cable inductance & distortion
- Two 12AWG HC-OFC conductors for superior signal transfer
- Sophisticated multi-gauge design for superior bass, mids & highs
- Insulated solid conductor eliminates distortion with stranded bundles
- Each pre-terminated cable connects a single speaker
- Terminated with banana plugs
- Decorative woven jacket over a UL CL2 PVC Jacket
- 1.8m cable included
- Longer lengths available

Ugly 12 AWG Speaker Cable

Hook up the other speakers in this surround system with high-quality speaker cable!

Our speaker cable uses a 99.95% Oxygen Free Copper (OFC) core, in a "Fig 8" configuration and performs at the highest levels. Unlike a lot of cheaper cables, this is a legitimate 12 AWG, many cheaper cables have a very thick jacket on them which makes the cable look a lot thicker than it really is.

Features:

- Size: 12 AWG
- Dimensions: 4.5mm x 9mm
- Carriers: 420 x 0.10mm x 2 cores
- PVC: Clear With White Trace
- 25m of cable included
- Longer lengths available

Tributaries Series 4 Subwoofer Y Cable

Connect your subwoofer with this high-quality Tributaries subwoofer cable.

The Tributaries Series 4 Subwoofer Y cables are designed to work with Subwoofers that do not have left and right inputs and where LFE is not available. and use ultra-pure highly conductive oxygen-free copper (HC-OFC) developed specifically for audio applications.

Key Features:

- Assembled by hand in Orlando Florida, USA
- Heavy solid 22AWG HC-OFC conductors
- Precision twisted pairs - excellent for audio
- LDPE eliminates distortion while maintaining flexibility
- Dual shielded to lower the noise floor
- Gold-plated solid-brass RCA connectors
- Decorative woven jacket over flexible PVC jacket
- 3m cable included
- Longer lengths available