Fibreglass Panels Acoustic Treatment Pack

Fibreglass Acoustic Treatment Pack

Whether it's a home theatre, recording studio, band practice space, or streaming room, this complete set of fibreglass panels and bass traps are a simple, affordable, and effective way of improving the acoustics of any room where audio performance is important. This pack is designed to treat the complete sound spectrum and includes panels for mid-high frequencies and bass traps for low (bass) frequencies.

Ideal for:

• Dedicated Home Theatres
• Professional Recording Studios
• Critical Listening Rooms
• Rehearsal/Band Practice Spaces
• Streaming/Gaming Areas

Includes:

6x 1200x600x50mm Fibreglass Acoustic Treatment Panels
4x 600x600x50mm Fibreglass Acoustic Treatment Panels
16x Large 60cm Bass Traps

Recommended Installation

This pack is designed to offer an effective and affordable acoustic treatment solution for home theatres and listening/recording spaces. Every room is different, but in a typical home theatre layout, you may want to install the panels as follows:

- 2 large panels on each side wall and the rear wall
- 4 small panels on front wall underneath screen
- 8 bass traps in each front corner

How do Acoustic Panels Work?

Does your home theatre or listening room suffer from echoes that muddy up the clarity of your music or movies, and the performance of your speakers? Acoustic panels attenuate rogue sonic reflections in a room, resulting in a clearer sound. They achieve this by allowing sound to pass through them, reflect off the wall behind, and then pass through them again. Each time the sound passes through the panel, it is attenuated.

Fabric Wrapped Fibreglass

Throw away your egg cartons and invest in an acoustic treatment solution that will do your room justice, both sonically and visually. This acoustic treatment panel is made with thick, dense fibreglass, which is several times as dense as typical sound foam. This means that sound energy is more effectively attenuated by this fibreglass panel.

As well as performing better, this panel looks much better than many common acoustic treatment solutions. Wrapped in coloured fabric and featuring a bevelled edge and flat face, this fibreglass panel is the ideal solution for modern studios or theatres, and will also look great in office spaces, gyms, restaurants, and any other space where good acoustics are required.

Fibreglass Acoustic Treatment Panels

These high-quality fabric wrapped fibreglass panels are an effective and stylish solution for rooms where untamed echo is an issue. Install these panels in any room where audio performance and clarity is important.

Key Features

• Wall-mounted acoustic absorption panel
• 6x 120cm x 60cm x 5cm panels
• 4x 60cm x 60cm x 5cm panels
• 80kg/m³ density for increased absorption
• Most effective at reducing mid-high frequencies
• Reduces and tames chaotic sound reflections/reverberation in a room
• Affordable and effective acoustic correction solution
• Ideal for professional & residential uses
• Coloured fabric wrap with bevelled edge suits modern theatres and studios
• Lightweight for easy installation
• Includes fixing clips for wall mounting

Fixing Clips Included

These lightweight fibreglass panels each include a set of fixing clips for mounting to the wall. Simply fix the clips to the wall and hook the panel on by impaling it on the clips. The specially designed fixing clips position the panel flush against the wall for a visually neat and unobtrusive acoustic treatment solution.

This fixing clip will arrive with the teeth pushed in to avoid damage in transit. You will need to open the teeth up to a 45-degree angle before mounting the clip to the wall. Use a second mounting clip or a screwdriver to open up the teeth to the correct angle.

These clips allow you to easily set up an acoustic treatment solution with minimal damage to the walls or the panels.

Two fixing clips are included. If you require more, spare clips can be found here.

Creative Installation

Install straight or at an angle, you can get creative with how you treat your room and create patterns with a set of panels. The hooked fixing clips allow you to align the panel however you like. Improving your room's acoustics is as simple as that!

There are plenty of guides online that will tell you the best way to install acoustic panels, but each room is different in size and dimensions, and therefore, will have different needs. The best place to start is by addressing the first reflections in the room since these reflections will be the most intense. The first reflection point is the mirror point between a loudspeaker and your listening position. These are on the two walls on either side of the main speakers.

Sound Foam Bass Traps

These large bass traps are designed to be positioned in the corners of your listening room, where the strongest low-frequency reflections are occurring.

Features

• Improves your room's acoustics
• Designed for low frequencies
• 16 bass traps included
• Each trap: 60cm tall and 29.5cm wide
• 35kg/m3 density

Installation

Most of the time, the best way to install these bass traps are to attach them to walls/ceilings with staples, nails, glue or double-sided tape.

We have included enough bass traps to install 4 in each corner (in a typical 4-walled room), which will noticeably reduce the intensity of bass reverberation.

Soundproofing?

Please note that acoustic panels and bass traps are designed for improving the acoustics within a room; it is not effective for attenuating volume in a room or removing outside noise.