Rega Planar 6 Turntable
The Planar 6 is now available to DEMO at our Hallam and Thornbury stores with the Ania MC cartridge.
The Planar 6 has one goal, to reproduce your vinyl as accurately as possible.
Rega have engineered every aspect of this turntable to extract as much detail from the vinyl surface as possible. Advanced materials and engineering solutions have been used throughout the design to ensure the greatest level of performance. The Neo PSU offers electronic speed change, advanced anti-vibration control and user adjustable electronic fine speed adjustment only found on the RP10 until now.
User Manual (PDF, 162KB)
Key Features
- NEO power supply included
- Super lightweight foam core plinth
- New Polaris HPL (high pressure laminate)
- 'Polaris Grey' matte finish
- High-gloss black polymer edge trim
- Non-marking & scratch-resistant matte finish
- Upgraded white drive belt fitted as standard
- Custom dual layer smoked / clear float glass platter
- Single piece aluminium sub platter
- Custom machined high precision drive pulley
- Patent pending, ultra-low friction central brass hub
- Rega’s double brace technology
- RB330 handmade precision tonearm
- New high spec Rega 24v low noise synchronous motor
- Each motor is matched by hand to its own NEO PSU
- New smoked dust cover
- New aluminium foot trims and Planar style feet
Rega Planar 6/Ania review
"It’s a frankly astonishing refined and mature sound. Some of that is down to the moving-coil cartridge’s inherent characteristics, but this overall package more than justifies its higher pricing."
Read the full review on What Hi-Fi?
Ultra-Light
The Planar 6 is built around the huge success of the RP8 and RP10 turntables. It is the first new Rega turntable to be constructed with an ultra lightweight Tancast 8 polyurethane foam core plinth (a material developed for the aerospace industry). This material is sandwiched between a new HPL (high pressure laminate). HPL is exceptionally thin yet extremely rigid and is presented in a stunning Polaris matte grey finished with high gloss polymer black edge trim.
The Planar 6 now benefits from a single piece, machined aluminium sub-platter, a new 24v motor hand tuned and matched to its own NEO power supply and custom drive pulley fitted with our upgrade drive belt as standard.
Plinth
Super lightweight foam core plinth. Plinth laminate: New Polaris HPL (high-pressure laminate). Non-marking matt finish scratch resistant high rigidity skin. Available in one finish ‘Polaris Grey’ matt finish with high gloss black polymer edge trim.
Double Brace Technology
Rega’s double brace technology, with integral custom matched aluminium tonearm and hub pillars to ensure maximum rigidity and accuracy.
NEO PSU
The Neo PSU uses the RP10 DSP (digital signal processing) generator built upon a high stability crystal. The DSP generator will divide the accurate signal from the crystal to the exact frequency required to turn the platter at the selected speed. The DSP generator will also produce a near perfect sinusoidal waveform to drive the motor. This, along with an efficient drive amplifier, generates a 24V AC balanced signal of less than 0.15% distortion, which is completely un-affected by any changes in the mains/line voltage and conditions. This then drives the turntables anti-vibration circuit, which is situated beneath the turntable.
RB330 Tonearm
The RB330 tonearm was designed using the latest 3D CAD & CAM technology and is the culmination of more than 35 years of tonearm design experience. Featuring a brand new bearing housing, and our latest tonearm tube designed using intelligent redistribution of mass ensure this arm will exhibit fewer points of possible resonance. Extreme stability with almost friction-free movement from the new high-precision bearing assemblies guarantees to gather more information from your vinyl than ever before.
Select Your Cartridge
The Rega Planar 6 is available with no cartridge, or with the following cartridges factory-fitted:
Exact MM Cartridge
Each one of Rega's moving magnet cartridges are meticulously hand assembled to the highest standard by their highly trained technicians. The design and assembly procedure are focused on one simple goal, extracting as much music from your vinyl as possible. Each cartridge uses a pair of parallel wound coils which are then carefully assembled on custom jigs to create a working stereo generator. Each cartridge is then tested and checked over two days to ensure all of the strict parameters for each model are met before either packing or fitting to a Rega turntable.
Sharing the same physical design as the rest of Rega's range of MM cartridges, you can be sure that this cartridge efficiently transfers the energy it picks up with no loss of energy between stylus and headshell.
Key Features:
- Moving Magnet cartridge suits most systems
- Vital profile, rectangular diamond billet
- Three point mounting system
- Output: 6.8 - 7.2mV
Ania Moving Coil Cartridge
The newest member of the Rega MC cartridge range, the Ania was inspired by the success of the Apheta 2 and Aphelion MC cartridges. Using the same exceptionally complex hand wound micro coil found in the rest of the range, the Ania is housed in a unique PPS highly rigid body, ensuring accurate construction and Rega's three point fixing method ensuring optimum connection to the headshell and automatic setting for overhang. The new body is protected by a CAD designed, clear rigid cover to protect the internal fine wires, making handling whilst fitting, safe and risk free.
The Ania features a super high-powered, neodymium magnet and a coil meticulously hand wound on to an iron cross. This miniature assembly allows for greater freedom to track the vinyl groove ensuring even more detail is extracted from the record.
Key Features:
- Moving Coil cartridge
- Iron cross & micro coil assembly
- One of the world's smallest MC generators
- Cutting edge neodymium magnet
- Elliptical profile stylus
- Constructed from high specification 0.018mm fine wire
| Model Number | Planar 6 |
|---|---|
| RRP | 2,399.00 |
| Specs | Dimensions Turntable
Dimensions Neo PSU
Exact Cartridge
Ania Cartridge |
Rega components carry a 3 Year Australian warranty covering parts and labour and a lifetime warranty against manufacturing defects.
Cartridges, styli, and consumables carry a 90 day warranty.
To register your product or make a warranty claim online, visit Synergy Audio.
We offer free post on all orders over $29 to anywhere within the Australian mainland and Tasmania.
Can I pick up my purchase from your store?
Yes. You can usually pick up your order from one of our stores. We recommend that you contact us first to ensure your order is ready for collection.
What happens if I'm not happy with my product when it arrives?
All change of mind returns must be in as new condition, in original packaging. We provide a generous 30-day change-of-mind guarantee on our products (unless otherwise stated). All change of mind returns must be in as new condition, in original packaging.
Please visit our FAQ page for answers to other frequently asked questions or contact us if you have any other questions or comments.