The Selby Boxing Day Price Promise. Shop Now With Confidence!

Krix Equinox 5.1 + Yamaha RX-V4A

As low as $4,399

RRP $5,029

In stock

SKU
BUN900619

• Australian-made speakers

• Premium sound quality

• Choice of finishes

• Powerful Yamaha Surround Receiver

Customise Krix Equinox 5.1 + Yamaha RX-V4A
1 Yamaha RX-V4A 5.2 Channel AV Receiver (In Stock.)   + $0

* Required Fields

Your Customisation
Krix Equinox 5.1 + Yamaha RX-V4A
Krix Equinox 5.1 + Yamaha RX-V4A

In stock

$4,399

Summary

    Krix Equinox 5.1 Pack + Yamaha RX-V4A Receiver

    This amp and speaker 5.1 system features Australian Made speakers from award-winning loudspeaker manufacturer, Krix and a Yamaha Receiver with MusicCast built-in. This space-conscious pack features the small but powerful Equinox bookshelf speakers for both front and rear channels, with the Graphix centre channel and Seismix 1 subwoofer rounding out the package. Available in your choice of 3 finish options* including traditional Black Woodgrain vinyl, or a more premium Real Timber veneer in either Atlantic Jarrah or Blackwood.

    *The Seismix 1 is only available in Black Woodgrain vinyl.

     

    What's Included:

    - Yamaha RX-V4A 5.2 Channel AV Receiver
    - Krix Equinox Mk5 Front & Surround Bookshelf speakers
    - Krix Graphix Mk2 Centre speaker
    - Krix Seismix 1 Subwoofer

     


    Krix Equinox Mk5 Bookshelf Speakers

    For a big sound from a small speaker, the Equinox Mk5 will astonish and surprise. With finesse and power punching well above its weight, it can be tucked-away while still filling the room with sound.

    The mid-range and bass come from a high grade 130mm driver with a doped curvilinear paper cone, over-sized voice coil, and powerful magnet, while extended frequency response is delivered through a 26mm ring radiator tweeter. Combined with its bass reflex design, the result is an efficient but balanced bass sound with a revealing, detailed high end, performing well beyond the relatively small cabinet size of the speaker.

    Key Features:
    - 5" doped curvilinear paper cone woofer
    - 1" dual concentric diaphragm with wave-guide tweeter
    - Power Handling: Maximum 120W RMS
    - Nominal 6 ohm impedance (minimum 3.6 Ohms)
    - 45Hz > 40kHz Frequency response
    - Rear vented enclosure with internal bracing

     

     

    Krix Graphix Mk2 Centre Speaker

    Small and compact, the Graphix is the perfect choice for use in TV cabinets and custom joinery and the dual front ports eliminate ‘boomy’ bass qualities found when using rear ported speakers in this type of application. The Graphix delivers an acoustically intricate experience every time.

    Make every chair the best seat in your house with a Krix centre speaker. Krix’s centre speakers reproduce vocals and other complex information accurately, optimising imaging and sound stage. The centre channel in your home theatre system can deliver around 70% of the action and should be of a similar sonic quality to your main speakers. For home theatre applications and music listening pleasure, a Krix centre speaker will enhance your sound experience.

    Key Features:
    - 2 x 5" Bass/Mid Driver with 1" Fabric dome with Neodymium magnet 
    - Power Handling: 120W RMS
    - Power Handling: Maximum 120W RMS
    - Nominal 4 ohm impedance
    - Frequency response: 50Hz > 20khz

     

     




    Krix Seismix 1 Mk5 Subwoofer

    For a big bass experience from a discreet subwoofer that can be placed almost anywhere in the room, the Seismix 1 Mk5 will provide the right sound while taking up half the space.

    With a hefty 200mm downward firing woofer and vent, and a high quality class D amplifier, the Seismix 1 Mk5 combines high efficiency with low power consumption. Its compact design - with the raised cabinet kept off the floor with specially moulded rubber feet - provides flexibility, without sacrificing bass impact.

    With effective design and simple styling, this unobtrusive subwoofer will look and sound great, whether tucked discreetly in the corner or built into custom joinery.

    Key Features:
    - 1 x 8" bass driver, 1.5" voice coil
    - Power Handling: 300W RMS
    - Frequency Range: 25Hz-200Hz in room response
    - Output: 116dB maximum SPL in room response
    - Enclosure Type: Bass reflex, down firing vent
    - Low Pass Filter: 50Hz-200Hz or bypass
    - Phase Select: 0º to 180º continuously variable (relative to input signal)
    - Inputs: Stereo line level RCA








    Yamaha RX-V4A 5.2 Channel AV Receiver

    Enter the world of home theatre with the brand-new Yamaha RX-V4A. This AV receiver will completely transform how you listen and watch at home. Plus, plenty of features means plenty of choices on how to enjoy your entertainment.

    Key Features:
    - 5.2 Channel High Slew Rate Surround Amplifier
    - Brand new look and interface
    - 80W Power Per Channel (8 Ohms, 20Hz - 20kHz, 0.06% THD)
    - 3x Analogue, 1x Optical, 1x Digital Coax Audio Inputs
    - 4x HDMI Inputs (8K @ 60Hz Picture)
    - HDR 10+, 8K/60 Hz and 4K/120 Hz
    - FM & DAB+ Radio
    - MusicCast & Airplay 2
    - Wireless Surround Support
    - Dual Subwoofer Pre-Outputs

     


    Save 20% on matching cables!

    You'll need some quality cables to get the most from this satellite system. Why not grab a roll of great value 14AWG speaker cable and a high-quality subwoofer cable at the same time, and save even more!

    Simply select the lengths you need and rack up the savings!

    These cables feature Oxygen-Free Copper (OFC) conductors which accurately transmit the signal to your speakers for accurate audio reproduction.

    To prevent unwanted hum in your subwoofer, this subwoofer cable features mylar-coated aluminium shielding eliminates EMI and RFI interference. 

    Specifications
    Model Number Equinox Graphix Seismix1 RX-V4A
    RRP 5,029.00
    Specs

    Specifications:

    Equinox Mk5

    Frequency Range: 45Hz - 40kHz in room response
    Power Handling: 20 - 120 watts RMS amplifier power
    Sensitivity: 88dB for 2.83 volts at 1 metre
    Configuration: 5 inch 2-way
    Bass Driver: Cast aluminium basket with a nominal 130mm (5") doped curvilinear paper cone. 30mm (1.2") vented magnet voice coil wound on high temperature kapton former, with copper shorting ring.
    Tweeter: 26mm (1") dual concentric diaphragm with wave-guide centre plug for controlled directivity. Non-reflective dual chambered magnet structure with copper shorting ring to lower distortion.
    Impedance: Nominally 6 Ohms (minimum 3.6 Ohms)
    Enclosure Type: Bass reflex, rear vented with internal bracing
    Dimensions: 295mm high x 175mm wide x 235mm deep 
    Finish: Choice of Timber Veneer or Black Vinyl
    Weight: 6kg each

    Graphix Mk2

    Frequency Range: 50Hz - 20kHz in room response
    Power Handling: Maximum 120 watts RMS amplifier power
    Sensitivity: 89dB for 2.83 volts at 1 metre
    Configuration: Point source dual 5 inch 2-way
    Bass Drivers: Fibre reinforced moulded polymer baskets with 2 x nominal 130mm (5”) doped paper cones. 25mm (1”) voice coil wound on high powered aluminium former, with vented magnet assembly. Fully shielded
    Tweeter: 28mm (1”) doped fabric dome. Ferro fluid cooled. Neodymium magnet
    Crossover Point: 2.1kHz
    Impedance: Nominally 4 ohms Enclosure Type Bass reflex, front vented with internal / external flaring
    Dimensions: 180mm high x 450mm wide x 300mm deep (including grille) Material 17mm MDF with internal bracing
    Volume: 14 litres internal
    Weight: 10kg

    Seismix 1 Mk5

    Frequency Range: 25Hz – 200Hz (-6dB) in room response
    Bass Driver: Nominal 200mm (8”) diameter doped paper cone driver
    Voice coil: 38mm (1.5”) wound on high powered aluminium former, with vented magnet assembly
    Amplifier Power: 150 watts RMS into the nominal 4 ohm driver
    Maximum instantaneous power: 300 watts
    Amplifier S/N: >85dB
    Distortion - Input to Speaker: <0.2% – @ 130 watts RMS
    Left Line Level Input (mono): 130mV RMS for max output
    Left + Right Line Level Input (stereo): 65mV RMS for max output
    Output: 116dB maximum SPL in room response
    Auto Power On / Off: 20 minute delay before switching to standby after no input signal
    Phase Select: 0° or 180° (relative to input signal)
    Enclosure Type: Bass reflex, downward firing vent with internal / external flaring
    Dimensions: 375mm high x 295mm wide x 320mm deep
    Material: 17mm MDF
    Finish: Black Woodgrain vinyl
    Volume: 21 litres internal
    Weight: 11kg

    Yamaha RX-V4A 5.2 Channel AV Receiver

    FEATURES

    UNPARALLELED SOUND
    /Cinema DSP 3D
    /Music Enhancer
    /High Slew Rate Amplifier

    MOVIES AND GAMES LIKE NEVER BEFORE
    /HDR 10+, 8K/60 Hz and 4K/120 Hz*
    /Gaming-dedicated functions (ALLM,VRR,QMS,QFT)*
    /Multiple 8K Compatible HDMI Inputs*

    SIMPLE TO SET UP, SIMPLE TO USE
    /AV Setup Guide App
    /MusicCast APP
    /Voice control with Alexa and Google Assistant devices or Siri via Airplay 2. *availability varies by region

    MADE FOR YOUR ROOM
    /YPAO™
    /Wireless Rear Speaker compatible
    /Brand new design

    *Available via FW update

    SPECIFICATIONS

    Amplifier
    Channel: 5.2
    Rated Power: 80W (8 ohms, 20hz-20kHz, 0.06 THD)
    Rated Power: 115W (6 ohms, 1kHz, 1ch driven, 0.9% THD)
    Speaker Terminals: 5
    High Slew Rate Amplifier: Yes

    Inputs / Outputs
    HDMI In: 4
    HDMI Out: 1
    4K Support: 4K@60Hz / 4k@120Hz
    8K Support: 8K@60Hz
    Video Upscailing: Upto 4K
    HDR Support: HDR10/HDR10+/Dolby Vision/HLG
    HDMI Features: VRR/QMS/ALLM/EARC
    Digital Optical: 1
    Digital Coax: 1
    Analogue: 3
    XLR: -
    Wi-Fi/Ethernet: Yes (2.4Ghz/5Ghz)
    Bluetooth: Yes
    Airplay 2: Yes
    USB: Yes
    Pre-out: 2 x Mono Subwoofer
    Headphone Output: 1
    Phono: -

    Audio Features
    Sound Format: Dolby TrueHD / DTS:MA
    Dolby ATMOS: Height Virtualization -
    DAC: BurrBrown PCM5101A
    Pure Direct: Yes
    Surround: AI: -
    Powered Multi-Zone: Zone B (with 3.1 Main Zone)

    Network
    MusicCast Multi-room: Yes
    Wireless Surrounds Compatible: Yes
    Airplay 2: Yes
    Streaming Services: Spotify/Tidal/Deezer/Amazon Music/Net Radio
    Voice Control Services: Amazon Alexa/Google Assistant
    Network Control Protocol: YXC (MC Control)
    3rd Party Control (With Drivers): -

    Other
    OSD/GUI: OSD (Overlay)
    Video Upconversion (Analog to HDMI): -
    YPAO Automatic Calibration: Yes
    Radio Tuner: DAB+/FM

    General
    Standby Power Consumption (IR only): 0.1W
    Dimensions (WxHxD): 435 x 171 x 377 mm
    With Antenna Up: 435 x 245 x 377 mm
    Weight: 8.8kg

    Write Your Own Review
    You're reviewing:Krix Equinox 5.1 + Yamaha RX-V4A
    Your Rating

    5 Year Warranty
    All Krix speakers are Australian designed and Australian made.
    Krix are so confident in the quality of their products that they provide a 5 Year Warranty with all new Krix speakers.
    To claim your warranty, please register your product with Krix within 90 days of the purchase date.

    Register with Krix

    2 Years
    Purchase with confidence. This receiver includes a 2 Year Warranty from Yamaha Australia, for your peace of mind.

    Problems?
    If you experience any issues with this product please don't hesitate to contact us.
    How much does delivery cost?
    We offer free post on all orders over $29 to anywhere within the Australian mainland and Tasmania.

    Can I pick up my purchase from your store?
    Yes. You can usually pick up your order from one of our stores. We recommend that you contact us first to ensure your order is ready for collection.

    What happens if I'm not happy with my product when it arrives?
    All change of mind returns must be in as new condition, in original packaging. We provide a generous 30-day change-of-mind guarantee on our products (unless otherwise stated). All change of mind returns must be in as new condition, in original packaging.

    Please visit our FAQ page for answers to other frequently asked questions or contact us if you have any other questions or comments.