Krix IC-52, IC-50 (Atmospherix) 5.1 pack + Denon AVR-X1800H

As low as $4,999

RRP $5,629

Call to order

SKU
BUN900553

• Powerful Denon Atmos Receiver

• Australian made Krix Speakers

• Discreet speakers are Heard not seen

 

Denon AVR-X1800H & Krix 5.1 Discreet In-Ceiling Home Theatre Package

A great sounding home theatre system can make or break the home cinema experience, and if keeping said system discreet is a priority, then an in-ceiling setup is ideal. This package features speakers from renowned Australian speaker manufacturer Krix. Distributed throughout the world, Krix is at the leading edge of loudspeaker design and the IC-52 (Atmospherix A20) and IC-50 (Atmospherix AS) in-ceiling speakers are no exception. The enclosed design maximises and controls bass response while keeping out dust and other ceiling inhabitants. Krix Architectural speakers are ideal for an out of sight audio experience. The 3 angled speakers are ideal for your front LCR channels as they are placed toward the front of your room and direct sound towards your seating position, while the direct AS speakers do the job of your surround channels placed more directly over your seating position.

Supporting the IC-52 and IC-50 (Atmospherix) in-ceiling speakers is the powerful Seismix 3 active subwoofer. Incorporating a 275mm (11") bass driver specifically developed for high-level low-frequency reinforcement, combined with an efficient and simple to operate 300-watt class D amplifier. Less than 1-watt standby power consumption satisfies the most energy-conscious consumer. Attractive non-marking soft rubber feet allow easy positioning and reduce unwanted floor vibrations.

Powering this speaker system is the Denon AVR-X1800H 7.2-channel surround sound receiver. The AVR-X1800H delivers the ultimate home theatre experience with 8K/60Hz pass-through and 4K/120Hz pass-through, as well as support for the latest HDMI specifications.

What's Included:

Denon AVR-X1800H 7.2 Ch AV Receiver
• Krix IC-52 (Atmospherix A20) 5" Angle In-ceiling speakers x 3
• Krix IC-50 (Atmospherix AS) 5" In-ceiling speakers x 2
• Krix Seismix 3 (Mk7) Active Subwoofer in Black Woodgrain vinyl


Denon AVR-X1800H - 7.2 Ch 8K AV Receiver with HEOS Built-in

Bringing the thrill of a front-row ticket to the movies or a concert hall to your lounge room or home theatre, their latest AVR is an affordable gateway to the world of enveloping 3D sound and sumptuous 8K picture quality.

With a high-performance seven-channel amplifier that can deliver room-filling sound, enveloping 3D audio with Dolby Atmos® and DTS:X®, and three 8K HDMI inputs for pristine UHD picture quality, the AVR-X1800H is built to create unmatched movie, music, and gaming experiences in typical-sized rooms.

8K video is supported on three of six HDMI inputs and the output. Enjoy easy video compatibility and great picture quality with HLG, HDR, Dolby Vision, HDR10+, and Dynamic HDR passthrough.

 

Key Features:

• High-performance discrete 7-channel amplifier
• 80 watts per channel (8 ohm, 20 Hz - 20 kHz, THD 0.08% 2ch driven)
• 120 watts per channel (6 ohm, 1 kHz, THD 0.7%, 2ch driven)
• 8K/60Hz and 4K/120Hz support with 8K upscaling
• 6 advanced HDMI inputs (3x 8K) with full HDCP 2.3 support
• Enhanced Audio Return Channel (eARC) HDMI support
• Immersive 3D audio technologies including Dolby Atmos, DTS:X and DTS Virtual:X
• Dolby Surround and DTS Neural:X upmixers optimize legacy content
• Latest HDR support including HDR10+, HLG, Dolby Vision, and Dynamic HDR
• Variable Refresh Rate, Auto Low Latency Mode and Quick Frame Transport
• Control with your voice via Amazon Alexa, Google Assistant and Apple Siri
• HEOS Built-in wireless multi-room music streaming technology
• Wireless high-res (24bit/192kHz) streaming from the most popular music services
• Built-in Bluetooth and Wi-Fi with 2.4GHz/5GHz dual-band support
• Award-winning Denon Setup Assistant with Audyssey MultEQ XT calibration software
• Phono input and dual subwoofer outputs

 


Krix IC-52 (Atmospherix A20) Angled In-Ceiling Speakers (x3)

The IC-52 (Atmospherix A20) incorporates a 20 degree angled baffle to project the sound to your primary listening area. This means less sound is reflected off walls and other surfaces. Your experience is clearer, there is a more three-dimensional soundstage, better definition for music listening, more articulate dialogue, and more realistic and involving sound effects in movies.

The bass driver and tweeter are separately mounted on the front baffle, like Krix’s bookshelf speakers, for true hi-fi performance. Bass and midrange clarity are delivered through a massive 130mm bass driver with a large magnet and copper shorting ring, while the 26mm ring radiator delivers high frequencies. A fully-enclosed back box optimises performance from the bass driver in any installation setting and protects from ceiling debris and sound leakage. Being tonally balanced to the Krix floorstanding and bookshelf speakers, the IC-52 (Atmospherix A20) are ideal front or rear speakers for home theatres, but also provide a dynamic stereo music sound.

Key Features:

• 5" doped curvilinear paper cone woofer
• 1" ring radiator tweeter
• Power Handling: 20 - 120W RMS
• Nominal 6 ohm impedance
• 45Hz > 40kHz Frequency response
• Bass reflex, front vented
• Cut-out Diameter: 247mm

 


Krix IC-50 (Atmospherix AS) 5" In Ceiling Home Theatre Speakers (x2)

With speaker components mounted directly on the front baffle, the IC-50 (Atmospherix AS) delivers a true high fidelity performance, and maintains accurate and controlled bass performance from the discreet in ceiling mounted enclosure. A large 130mm bass driver with large magnet and copper shorting ring delivers bass and midrange clarity, while a 26mm ring radiator provides extended high frequency performance.

The moving components of the IC-50 (Atmospherix AS) are protected from dust and debris through a fully-enclosed back box, designed to optimise the performance from the bass driver, allowing maximum controlled bass and consistency while drastically reducing sound leakage to other rooms. The attractively styled, slim bezel grille is made from rust-resistant stainless steel and snaps into place with magnets, making installation easy. Being paintable, these speakers will involve you in their sound, while disappearing to be heard, but not seen.

Key Features:

• 1 x 5" bass drivers, 1" ring radiator tweeter
• Maximum 100 watts RMS amplifier power
• Nominal 6 ohm impedance
• 45Hz > 20khz Frequency response
• Bass reflex & sealed back, Front vented enclosure
• Dimensions: 295mm diameter x193mm deep (HxWxD)

 


Krix Seismix 3 Mk7 Active Subwoofer in Black Woodgrain Vinyl

You won’t have to sacrifice musicality for low frequency output with this tuneful speaker that will allow you to truly feel the rumble of bass with supreme clarity. The Seismix 3 is a front-firing, vented subwoofer, and features a Krix designed 275mm long throw bass driver, developed specifically for high-level low frequency reinforcement. Enhanced geometry within the magnet structure increases linear cone travel by a whopping 30 percent and allows superior driver control, while the built-in high performance class D amplifier delivers increased sound efficiency with lower power consumption.

Key Features:

• 1x 275mm (11") bass driver, 50mm (2") voice coil 
• Power Handling: 300 watts RMS
• Nominal 4 ohm impedance
• 22Hz > 200Hz Frequency response
• Bass reflex, front vented with internal / external flaring
• Dimensions: 450mm x 360mm x 410mm (HxWxD)

 


[Optional] Make it a 5.2 pack by adding a second Seismix 3!

Take advantage of the receiver's dual subwoofer outputs by adding a second Seismix 3 to this package!

Dual subwoofers will enhance your home entertainment experience with an even greater level of bass and low-frequency control that is not possible with a single subwoofer in larger rooms.

 



[Optional] Make it a 7.1 Pack with additional speakers!

If a 5.1 system isn't quite enough for what you want, you're welcome to select an additional pair of Krix Atmospherix AS or A20 in-ceiling speakers.

 


About Krix

The Krix team manufacture high-quality loudspeakers for home and commercial use. With some 2000 commercial cinema installations globally, you have possibly already experienced Krix sound. Distributed throughout the world, Krix is at the leading edge of loudspeaker design. Utilising the latest test equipment, 3D modelling and computer simulated design technology, Krix's innovative research and development team is a pioneering force in the Australian loudspeaker industry.

Home Cinema

Experience cinema sound. Krix speakers were chosen as the audio solution for over half of all commercial cinemas across Australia. The same Krix expertise has been used to develop a speaker range specifically tailored for your home cinema system.

Purist

High fidelity sound reproduction. The quest for audio perfection is a Krix tradition. This stems from a passion for music. To appreciate music there is no substitute for an immaculately engineered Krix system.

Design

To be heard not seen. Discreet audio solutions are becoming increasingly popular. Krix's development team has designed a range of high-performance speakers that blend into your home décor. If you're after a built-in, multi-room, outdoor or concealed solution for your home audio, look no further.

Specifications
Model Number BUN900553
RRP 5,629.00
Specs

Denon AVR-X1800H 7.2 Ch AV Receiver

Number of Power Amps
7

Power Output (8 ohm, 20 Hz–20 Khz, 0.08% 2ch drive)
80 watts per channel

Power Output (6 ohm, 1 kHz, 0.7% 2ch drive)
120 watts per channel

Power Output (6 ohm, 1 kHz, 1% 1ch drive)
175 watts per channel

Video ports

HDMI In/Out
6/1

Audio ports

Speaker terminals
7

Analog In/Out
2 / No

Phono (MM) In
Yes

Digital in: Optical/Coaxial
2 / 1

Multi-Room Out: Analog/Digital
1 / No

Multichannel Pre-Out
Yes (2.2)

Subwoofer Out
2

Other

Compatible with Remote App for smartphones
Denon AVR Remote

Auto Speaker Setup by Microphone
Audyssey MultEQ XT

Front Display
1-Line FLD

GUI Languages
9

General

System Remote Control
RC-1257

Power Consumption
430W

Power Consumption (No Sound, ECO on/off)
29W/39W

Standby Consumption
0.1W

CEC Standby Consumption
0.5W

Dimensions (W × D × H)
434 x 339 x 151mm

Weight
8.6kg

 

Krix IC-52 (Atmospherix A20) 5" In Ceiling Speaker

Frequency Range: 45Hz-40kHz in room response
Power Handling: 20 – 120 Watts RMS recommended amplifier power
Sensitivity: 90dB for 2.83 volts at 1 metre
Configuration: 5 inch 2-way
Bass Driver(s): Cast aluminium basket with a nominal 130mm (5") doped curvilinear paper cone. 30mm (1.2") vented magnet voice coil wound on high temperature kapton former, with copper shorting ring
Tweeter: 26mm (1") ring radiator tweeter
Impedance: Nominally 6 Ohms (minimum 3.9 Ohms)
Enclosure Type: Bass reflex, front vented
Dimensions: 295mm diameter x 193mm mounting depth
Mounting cut-out diameter: 247mm recommended
Grille Finish: White or Black
Input Terminals: Gold plated spring terminals
Weight: 2.5kg each

 

Krix IC-50 (Atmospherix AS) 5" In Ceiling Speaker

Frequency Range: 45Hz - 40kHz in room response
Power Handling: 20 - 120 Watts RMS recommended amplifier power
Sensitivity: 90dB for 2.83 volts at 1 metre
Configuration: 5 inch 2-way
Bass Driver(s): Cast aluminium basket with a nominal 130mm (5") doped curvilinear paper cone. 25mm (1") voice coil wound on high powered aluminium former with copper shorting ring. Vented and double magnet shielded
Tweeter: 26mm (1") ring radiator tweeter
Impedance: Nominally 6 Ohms (minimum 3.9 Ohms)
Enclosure Type: Bass reflex, front vented
Dimensions: 295mm diameter x 183mm mounting depth
Mounting cut-out diameter: 247mm recommended
Input Terminals: Gold plated spring terminals
Grille Colour: White or Black
Weight: 2.5kg each

 

Krix Seismix 3 Mk6 Active Subwoofer in Black Woodgrain Vinyl

Frequency Range: 45Hz - 20kHz in room response
Power Handling: Maximum 100 watts RMS amplifier power
Sensitivity: 90dB for 2.83 volts at 1 metre
Configuration: 5 inch 2-way
Bass Driver: Cast aluminium basket with a nominal 130mm (5”) doped curvilinear paper cone. 
Voice Coil: 25mm (1”) wound on high powered aluminium former, with copper shorting ring. Vented and double magnet shielded
Tweeter: 25mm (1”) fabric dome, adjustable ‘eyeball’
Crossover Point: 2.1kHz
Impedance: Nominally 6 ohms
Enclosure: Type Bass reflex, front vented, sealed back
Dimensions: 280mm diameter x 190mm deep
Mounting cut-out diameter: 247mm
Finish: White (can be painted to match your décor)
Volume: 8 litres internal
Weight: 3kg each
Input terminals: Push type connectors

Write Your Own Review
You're reviewing:Krix IC-52, IC-50 (Atmospherix) 5.1 pack + Denon AVR-X1800H
Your Rating
2 Years
This Denon receiver includes a 2 year Australian warranty.

If you register your product within 2 weeks, the warranty is increased by a further 1 year bringing the total warranty to 3 years. Register your product here.


5 Year Warranty
All Krix speakers are Australian designed and Australian made.
Krix are so confident in the quality of their products that they provide a 5 Year Warranty with all new Krix speakers.
To claim your warranty, please register your product with Krix within 90 days of the purchase date.

Register with Krix

Problems?
If you experience any issues with this product please don't hesitate to contact us.
How much does delivery cost?
We offer free post on all orders over $29 to anywhere within the Australian mainland and Tasmania.

Can I pick up my purchase from your store?
Yes. You can usually pick up your order from one of our stores. We recommend that you contact us first to ensure your order is ready for collection.

What happens if I'm not happy with my product when it arrives?
All change of mind returns must be in as new condition, in original packaging. We provide a generous 30-day change-of-mind guarantee on our products (unless otherwise stated). All change of mind returns must be in as new condition, in original packaging.

Please visit our FAQ page for answers to other frequently asked questions or contact us if you have any other questions or comments.