60-100 Inch Tilt TV Wall Bracket PLB131XL

Selby's New & Improved Better Value Bracket
This bracket features several improvements over most slimline tilt brackets. For example, some slimline tilt brackets slowly tilt forwards due to the strain of supporting large TVs, but this bracket features a stronger tilt mechanism which prevents slippage. This bracket also allows you to tilt the screen both downwards AND upwards, which helps with connecting cables. Slimline brackets allow your TV to sit very close to the wall, but that usually makes it very difficult to connect the necessary cables to the back of your TV. Being able to tilt the screen upwards can provide you with much easier access to your TV's connections.

Designed for Australian Homes
This range of brackets is designed to suit the stud spacings of Australian homes. This PLB131XL fits across two 600mm-spaced studs (Australian standard).

Slimline Bracket for Thin TVs
This is a slimline bracket which sits closer to the wall than most other tilting brackets. It is designed for use with the ultra slim LED screens, but is also suitable for use with LCDs and Plasmas. Please note that some manufacturers recommend that LCDs and plasmas are not to be mounted within a certain distance from the wall, due to heat and ventilation concerns. If unsure, check your user manual or contact the manufacturer.

Vertical Tilting Action
This bracket offers a +/- 15 degree tilt. Perfect if you wish to mount your TV high on the wall and tilt it down, for example in the bedroom (or in the presence of curious young children with sticky hands!). Downwards tilt can also help to avoid getting annoying reflections on the screen, while upwards tilt makes it much easier to connect the necessary cables to the back of your TV.

Will it fit my screen?

This bracket will fit your TV screen (and not be visible from front on) if your TV is:
- At least 850mm wide.
- At least 420mm tall.
The four threaded mounting holes on the back of your TV need to be:
- No more than 800mm apart side to side.
- No more than 400mm apart top to bottom.
Maximum TV weight capacity is 60kg. 

Features:
- Low profile "slimline" design
- Easily adjustable
- +/- 15 degrees vertical tilt
- Free clip-on bubble level

Free Bubble Level
This bracket includes a free clip-on bubble level / spirit level to assist with accurate installation of the bracket.

Screws/Bolts
This bracket includes a variety of screws/bolts which are suitable for most installations. Unfortunately, due to the enormous range of TV brands and models available, we're unable to guarantee that the included fixings will suit every installation. 

Please Note
As with all wall brackets, if mounting on plasterboard walls it is essential that this bracket is fixed to a timber stud. This bracket can also be mounted on brick/concrete walls.

User Manual (PDF, 1,134KB)