32-60 Inch Full Motion TV Bracket BPLB137B

Features:
- Low Profile "Slimline" Design: 99mm from wall
- Pivot/Swivel: up to 45 degrees each way (left/right)
- Tilt: 15 degree each way (Up/Down)
- Includes small built-in level
- Also includes a free reusable bubble level

Low Profile "Slimline" Design
Most of the other brackets which can tilt forwards and also pivot/swivel left and right are quite bulky and can't fold up very compactly, making it impossible to position your TV close to the wall. This bracket doesn't have that problem: it can fold back to within 99mm of the wall. Please note that many manufacturers recommend that LCDs and plasmas are not to be mounted within a certain distance from the wall (refer to your TV's user manual), due to heat and ventilation concerns.

Horizontal Swivel/Pivot (Left/Right)
This bracket allows you to swivel/pivot your TV up to approximately 45 degrees to the left and right. Please note that larger TVs may be limited to an angle smaller than 45 degrees.

Vertical Tilt (Up/Down)
This bracket allows you to tilt your TV up or down to approximately 15 degrees each way. The tilt mechanism is located at the TV end of the "arms" and tilts the entire front section of the bracket.

Free Bubble Level
This bracket includes a reusable bubble level / spirit level to assist with accurate installation of the bracket.

Screws/Bolts
This bracket includes a variety of screws/bolts which are suitable for most installations. Unfortunately, due to the enormous range of TV brands and models available, we're unable to guarantee that the included fixings will suit every installation. 

Please Note:
As with all wall brackets, if mounting on plasterboard walls it is essential that this bracket is fixed to timber studs. This bracket can also be mounted on brick/concrete walls. Our bracket has a 630mm wide backplate, suitable for Australian standard 450mm & 600mm spaced studs.

Will it fit my screen?

This bracket will fit your TV screen (and not be visible from front on) if your TV is:
- At least 800mm wide.
- At least 420mm tall.
The four threaded mounting holes on the back of your TV need to be:
- No more than 770mm apart side to side.
- No more than 400mm apart top to bottom.
Maximum TV weight capacity is 80kg. 

User Manual (PDF,  1,127KB)