It has become commonplace now to mount your slimline television to the wall. You can see them mounted in restaurants, pubs, hospitals and in homes. Because screens are now getting larger all the time, you may not think you will be able to mount the huge new edition to your lounge room or Home Theatre wall.
Well guess what? You can! Perfect for extra-large Plasma or LCD TVs, the PLB 105XL is designed for very large flat panels. With two separate mounting plates, vertical extension arms and a maximum weight capacity of 150kg, this model suits very large, very heavy displays up to approximately 102”. The two mounting plates can be mounted as far apart as necessary, catering for almost any extra-large flat screen TV.
Extension arms are also included for very large TVs with very large VESA patterns. Including a built-in spirit level within each mounting plate helps ensure an accurate installation. Once you have completed the installation, you can put the included locking bar into place.
Will it fit my screen?
It's pretty easy to work out if this bracket will fit your screen:
1. First just measure your screen: as long as the outside of the screen is more than 530mm high, the bracket will not protrude from the top or bottom.
2. Check the mounting holes on the back of the screen and measure how far apart they are. The bracket will fit your screen if the mounting hole pattern is between 80mm and 800mm high (centre of screw hole to centre of screw hole). This bracket can accommodate a mounting hole pattern of any width.
3. Find out how much your Plasma / LCD weighs. You should be able to find this information in the user manual that came with your TV. The maximum weight capacity of this bracket is 150kg, so as long as your screen weighs no more than 150kg, this bracket is strong enough to hold it.
Dimensions of the Bracket
- Width: at least 1060mm (Each plate is 530mm)
- Height: 530mm (Without Extension Arms)
- Extended Height: Max 825mm (With Extension Arms)
- Dimension of Each Mounting Plate: 530mm Wide x 235mm High
Dimensions of the Mounting Holes
- Min Height: 80mm
- Max Height: 500mm (Without Extension Arms)
- Max Height: 800mm (With Extension Arms)
- Width: No Limit
When buying a low profile bracket like this it is important to consult the manual for your TV first. A lot of TVs are not suitable to mount so close to the wall as this bracket is because they need to vent heat. If that's the case with your plasma then you may be better off with our TILT version, as it sits slightly further away from the wall.
As with all wall brackets it is essential that this bracket is fixed to timber studs when mounting on plaster board walls.
Please Note:
Some panels require M6 16mm bolts which are not included. Where we try to include all fastenings needed, due to the large number of screens on the market we sometimes can't cater for all. Please check manufacturer’s specifications from your television prior to installing.
