42-90 Inch Slim Full Motion Tilt Swivel TV Bracket PLB127B.bl

Low Profile "Slimline" Design
Most of the other brackets which can tilt forwards and also pivot/swivel left and right are quite bulky and can't fold up very compactly, making it impossible to position your TV close to the wall. This bracket doesn't have that problem: it can fold back to within 73mm of the wall. Please note that many manufacturers recommend that LCDs and plasmas are not to be mounted within a certain distance from the wall, due to heat and ventilation concerns.

Vertical Tilting Action
This bracket offers vertical tilt from 0 degrees (flat) to -12 degrees (down), which is perfect if you wish to mount your TV high on the wall and tilt it down (for example, in the bedroom or in the presence of curious young children with sticky hands). The tilting action can also help to avoid annoying reflections on the screen.

Horizontal Swivel/Pivot (Left/Right)
This bracket also allows you to turn your TV up to 45 degrees to the left or right. Please note that larger TVs may be limited to an angle smaller than 45 degrees.

Features:
- Low Profile "Slimline" Design: 73mm from wall
- Forwards Tilt: 0 to 12 degrees down
- Pivot/Swivel: up to 45 degrees each way (left/right)
- Includes a free reusable bubble level

Free Bubble Level
This bracket includes a reusable bubble level / spirit level to assist with accurate installation of the bracket. Some brackets have a small built-in bubble level, but this stand-alone bubble level can also be used for any other jobs you have!

Screws/Bolts
This bracket includes a variety of screws/bolts which are suitable for most installations. Unfortunately, due to the enormous range of TV brands and models available, we're unable to guarantee that the included fixings will suit every installation.

As with all wall brackets, if mounting on plasterboard walls it is essential that this bracket is fixed to timber studs.

This bracket can also be mounted on brick/concrete walls.
Our bracket has a 630mm wide backplate, wide enough to fit 600mm studs in Australian walls.

Will it fit my screen?

This bracket will fit your TV screen (and not be visible from front on) if your TV is:
- At least 800mm wide.
- At least 480mm tall.
The four threaded mounting holes on the back of your TV need to be:
- No more than 700mm apart side to side.
- No more than 400mm apart top to bottom.
Maximum TV weight capacity is 80kg. 

User Manual (PDF, 1MB)